Grouting Compound

Product Details:

• High strength Polyester Resin Anchor Grout For Vertically Down ApplicationRapid Strength gain
• Vibration resistant
• Corrosino resistant
• Non expansive
• Can be placed underwater

Product Details:

• Flo-Grout 40 is pre-mixed, pre-packed chloride free cementitious grout. It contains cement, selected additives, well graded, and non-reactive aggregates and is designed to give excellent flow properties, shrinkage compensation, frost resistance, and high compressive strength.

• Good non-shrinkage characteristics.
• Extremely dense and low permeability.
• High early strength development allowing for rapid installation.
• High flow can be poured or pumped into variable gap widths down to 10 mm.
• Easy to apply, single component which require only addition of water.

• Machine beds.
• Stanchion bases, struts, railings, and guardrail assemblies.
• Filling of shutter tie rod openings.
• Anchoring of tie bars, and bolts.
• Pile top re-profiling.

Product Details:

• Non-Shrink: Gaseous expansion system compensates for plastic shrinkage and settlement in cementitious grouts.
• High Flow: Excellent grout fluidity at reduced water to cement ratio, for ease of placement or injection.
• Durability: Low water to cement ratio ensures low permeability and long term performance.
• Chloride free.
• Iron free.

• Flo-Add 1 is an expansive and plasticising admixture for cementitious grout where a low water to cement ratio and positive expansion are required.

• Flo-Add 1 is ideally designed for use in the following applications:
• Bed plate grouting.
• Duct grouting.
• Grouting tunnel lining.
• Non-shrink infilling grouts.
• Post tensioned cables.

Product Details:

• Low permeability and contributes to long-term durability of groutsHigh fluidity-easy for placement and injection of grout
• Gaseous expansion system compensates for plastic shrinkage and settlement in cementitious grouts
• High early strength development of grout without the use of chlorides

Product Details:

• Three component non-shrink epoxy ceramic tile and stone adhesive and grout with chemical, abrasion and slip resistance, mould, stain and water impermeability that may be applied on humid substrates (Formerly known as Quickmast TP)

• Quickmast EP550 is a chemical and abrasion resistant solvent free tile adhesive and grout ideal for demanding surface exposure or high traffi c areas. Quickmast EP550 may be applied in conditions where the substrate is humid.
• Quickmast EP550 is suitable for all types of ceramic tiles and stone in internal, external and submerged conditions. Quickmast EP550 is a three component system consisting of a resin base, hardener and select fi llers.

• Quickmast EP550 is suitable for indoor, outdoor and submerged use in application areas such as:
• Swimming Pools.
• Laboratories.
• Kitchens.
• Dairy Industries.
• Meet Poultry and Food Processing Plants.
• Hospitals.
• Abattoris.
• Pharmaceutical cal Plants.

Product Details:

• Free Flow High Strength Non Shrink Cementitious Precision Grout
• Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free fl owing, non-shrink grout for gap thicknesses up to 100mm. Conbextra GP2 is a blend of Portland cement, graded fi llers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fi llers are designed to assist uniform mixing and produce a consistent grout

• Conbextra GP2 is used for precision grouting where it is essential to withstand static and dynamic loads.  Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc.,  It can also be used for anchoring a wide range of fi xings.  These include masts, anchor bolts and fence posts.

• Gaseous expansion system compensates for shrinkage and settlement in the plastic state
• No metallic iron content to cause staining
• Pre-packed material overcomes onsite batching variations
• Develops high early strength without the use of chlorides
• High ultimate strength ensure the durability of the hardened grout
• Free fl ow ensures high level of contact with load bearing area

• Conbextra  GP2  conforms  to  ASTM  C1107  (Standard Specifi cation  for  Packaged  Dry,  Hydraulic-Cement  Grout (Non-shrink).

Product Details:

• Keygrout V is a two components, high strength, fast cure, polyester resin anchoring grout.
• Batch No: Base M 11190, Filler P 1372
• MRP: Rs. 506

• Exceptional rapid strength development.
• Resistant to dynamic loading.
• Damp tolerant. The product will cure under damp conditions and is resistant to immersion underwater.
• Exceptional high compressive, flexural and tensile strengths.
• Extremely dense.
• Exceptional bond to concrete and steel surfaces.
• Good chemical resistance.
• High ultimate and early strengths.
• Available into two grade, Keygrout H (Horizontal) and Keygrout V (Vertical).

• Keygrout V is ideally designed for use in the following applications:
• Permanent installation of reinforcement starter bars and dowel bars.
• Permanent installation of hand rails, safety fence, wall ties, railway tracks and ground anchors.