Waterproofing Chemical

Product Details:

Description:

• Supaflo is a superplasticising admixture formulated from selected polymers specially designed to enable the water content of the concrete to perform more effectively.
• This effect can be used to improve workability, to increase ultimate strengths or to facilitate a reduction in the cement content while sustaining mix properties.
• High performance water reducing superplasticiser admixture

Advantages:

• High strength increase with same cement content.
• Earlier formwork stripping by increasing early strength, particularly suitable for precast concrete industry.
• Improved workability reduces placing and compaction problems.
• Cement saving without affecting strength.
• Minimises segregation and bleeding problems by improving cohesion.
• More durable concrete as a result of reduction in permeability and lower water to cement ratio.
• Chloride free.

Applications:

• Low water cement ratio concrete.
• Accelerated early strength development.
• To produce high quality concrete of improved durability and water tightness.

Compatibility:

• Supaflo can be used with all types of Portland cement and cement replacement materials. Supaflo is compatible with other DCP admixtures used in the same concrete mix.
• If more than one type of admixture is to be used in the concrete mix, they must be dispensed to the concrete separately.

Product Details:

We, "Classic Trading Corporation" are Wholesaler and Trader of Waterproofing Chemical, Grouting Compound, Bonding Agent, Mortar Admixture, Grouting Machine, PPF Fiber, Birla opus paints and many more since 2015.

Product Details:

Conplast WL Xtra:

• Integral waterproofing liquid admixture for concrete, plaster and mortars.

Advantages:

• Advanced Technology :  New  generation  molecule yields high performance  concrete. Suitable for  any grade of concrete including higher grades.
• Corrosion resistant: Meets   the   requirements  of  Japanese  code JIS Z1535 (modified)  first  of  kinds  in the integral water proofing range.
• High Strength :  Due  to better dispersion  of   cement particles  and  helps  in  the better degree  of hydration yielding high strength compared to control.
• Cohesive Mix : Improves workability and cohesiveness of the concrete.
• Durability :  Improves  durability due to  reduction  in  permeability of concrete and corrosion resistance of steel.

Main uses:

• To minimise permeability and increase the waterproofing properties of concrete, plaster and cement sand mortars for critical applications like roof slabs, screeds, basements, external plastering, bathroom floors, water tanks, sumps, drains etc.

Panch Ka Dum (5 Benefits):

• Advanced technology
• Corrosion resistace
• High strength
• Cohesive mix
• Durability

Product Details:

Description:

• Liquid waterproofing admixture for concrete and mortarSetcrete RMW is Liquid waterproofing admixture for concrete and mortar formulated from selected polymers specially designed to reduce water permeability by reducing capillary voids, which will last for the life of the concrete and mortar.
• The presence of water in hardened concrete can cause corrosion of reinforcement which is made severe by freezing and thawing of concrete containing absorbed moisture.
• Further deterioration can occur if the water penetrating the concrete contains dissolved aggressive salts.

Advantages:

• Improves durability by minimizing penetration of moisture and water based chemicals.
• No additional water into dry or semi-dry mixes.
• Reduces efflorescence and pigment leaching from cement mortars.
• Chloride free.
• Improves plasticity cohesion.
• Better compaction and finishing.

Applications:

• Setcrete RMW is a waterproofing admixture for use in all cement based mortars, screeds and concrete.

Compatibility:

• Setcrete RMW can be used with all types of Portland cement and cement replacement materials. Setcrete RMW is compatible with other DCP admixtures used in the same concrete mix.
• If more than one type of admixture is to be used in concrete mix, they must be dispensed to the concrete separately.

Product Details:

Description:

• Quickmast 108 is a slow cure, solvent-free epoxy resin bonding agent that is supplied in pre-weighted two component packs which when mixed together produce a medium viscosity epoxy adhesive.
• Quickmast 108 can be easily spread over old concrete or cementitious substrates to permanently bond freshly casted concrete or new mortars.
• Batch No: M 1257 and M 1256
• MRP: Rs. 1151/Set

Applications:

• Quickmast 108 is a permanent epoxy adhesive for bonding fresh wet concrete/cementitious material to old concrete/cementitious surfaces, which is suitable for internal and external application.

Advantages:

• High bond strength.
• Moisture tolerant; can be applied to damp surfaces.
• Slow cure, allows more time for subsequent works such as fixing steel reinforcements and erecting shutter.
• High strength.

Product Details:

Description:

• AquaArm Tank Coat is a two-component epoxy resin based waterproofing compound. One part is consisting of epoxy resin andthe other part of hardener. After mixing both the parts, it can be thinned down with water of pre-determined quantity. It
• possesses all the attributes of normal solvent based epoxy compositions, such as excellent water and chemical resistance,
• adhesion, hardness, toughness sand mechanical strength.
• One of the major advantages of AquaArm Tank Coat over solvent based epoxy is that it can be applied on damp surfaces also.
• Being free from solvents, it does not pose any health hazard to the applicators. AquaArm Tank Coatless economical to apply.
• MRP: Rs. 498/Box
• Batch No: B-HR17C21106 and H-HR17C21105
• Mfg Date: 03/2021

Uses:

• Cement-concrete water storage tanks.
• Damp walls (Interior / exterior)
• As a primer before painting (Interior / Exterior)
• Toilet and kitchen walls.
• As a putty with White Cement to fill the fine cracks of external walls
• Sterile area of pharmacy, food industries, hatcheries & aqua farms.

Features and Benefits:

• Water dilatable
• Being water based it penetrates in concrete/plaster surface, seals the porosity and network of fine cracks.
• Reduces water permeability.
• After curing it forms a hard, tough and strong film.
• Bonds strongly on cement concrete/mortar, plaster, as besots sheet etc. surfaces.
• Excellent resistance to water, salt water, dilute acids, alkalis, Soap water, and other chemicals.
• Excellent resistance to positive (hydrostatic) water pressure.
• Non-toxic- CFTRI Certified for compatibility with potable water
• Eco-friendly - Non-hazardous and non-flammable.
• Applicability as Primer - Can be used as a primer for water based & solvent based paints.
• Microbial resistant - Possesses anti-fungal properties and is resistant to micro-organisms

Storage:

• Keep away from sharp objets
• Handle with care
• Keep Dry
• Keep away from direct Sunlight

Precautions
1. All previous coating to be completely removed beforeapplication of AquaArm Tank Coat. 2. Avoid application below 100C surface temperature3. At low temperature, drying and curing period will beProlonged4. before mixing both the parts, mix them in individualContainers5. Use nylon brush for easy brush ability6. Should not be applied on painted surfaces.7. Drying time depends on the condition of damp surfacesand temperature.8. Not resistant to acids and alkalis of higher concentrations(usable up to 5% concentration) and for a longer

Product Details:

How does MasterSeal 550 work?:

• MasterSeal 550 is a two component acrylic modified cementitious coating applied by brush, roller or trowel to waterproof concrete, masonry.

MasterSeal 550 is ideal:

• As a waterproof lining for water retaining structures
• For coating seawater channels
• Sealing and coating tie bar holes to ensure water tightness
• To provide foundation protection
• As a waterproof coating for wet areas and sunken slabs.
• To provide protection to concrete surfaces from carbonation and chloride attack???

What makes MasterSeal 550 a unique solution?:

• MasterSeal 550 provides an effective barrier to waterborne salts and atmospheric gases??????. Fluid applied, MasterSeal 550 provides a seamless, waterproof membrane for roofs and foundation protection.

What are the features and benefits of MasterSeal 550?:

• ?????????Protects against carbonation - A 1mm coating provides anti carbonation cover equivalent to over 80cm of concrete
• ???Waterproof – Suitable for internal and external waterproofing???
• Excellent adhesion - Bonds to porous and non-porous surfaces
• Flexible – Copes with the slight thermal movement of concrete structures
• Suitable for contact with potable water – Can be used for lining concrete water tanks
• Vapour permeable - Whilst repelling water, allows concrete to breathe thus preventing osmosis
• Compatable with moist surfaces – Can be applied to 24 hour-old concrete thereby giving immediate protection???

Product Details:

Description:

• Chryso Elastothane is a single component, bitumen / coal tar free high solid content liquid applied elastomeric polyurethane resin based cold applied coating system.  Ideally suited for waterproofing of  roofs, terraces, walls, basement conforming to ASTM C-836-95 & ASTM C – 898-95.

Benefits:

• Can be applied by brush or roller
• On drying CHRYSO ELASTOTHANE forms a seamless protective and waterproof membrane.
• Being viscous it does not sag when applied on vertical surfaces. CHRYSO ELASTOTHANE has excellent adhesion to dry as well as primed surfaces of concrete, tile, plaster, bituminous roofing felt, asphalt coating and metal.
• Cured membranes of CHRYSO ELASTOTHANE remain highly flexible even at extremes temperature range (-25?C to 120?C).

Domains of application:

• CHRYSO ELASTOTHANE is formulated to provide an easy, fast and sure system for waterproofing and protecting of new and old roofs, terraces, podiums, basement, swimming pool, planters, etc.

Product Details:

Two Part Acrylic Polymer Based Elastomeric Waterproof Coating

Features:

• Easy application, can be applied by brush, roller and squeegee at site.
• Elastomeric in nature, up to 1 mm crack bridging capacity.
• Ready to use, components are to be mixed at site before application.
• Bond well with all conventional cementitious and building materials.
• Safe for water tank containing potable water.
• Establishes a breathable one way traffic system for moisture, without blistering of coatings.
• Strong resistance to chloride and sulfate attack, thus making it very suitable for marine construction.
• Assured consultant quality: both components are batched and packed in factory and no outside no material is used.

Product Details:

Description:

• Elastomeric acrylic waterproof coating for roofs
• Aquaguard is an acrylic based elastomeric, waterproof coating for roofs and walls. Aquaguard is suitable for application on concrete, masonry, plaster, terrazzo tiles, corrugated iron, etc. Aquaguard is available in variety of colours and is ideally suited for external application.
• Packed for Industrial use
• Batch No: M 1337
• MRP: Rs. 7193/Bucket

Advantages:

• Elastomeric.
• Single component, easy to apply.
• Available in different colours.
• UV stable and resistant.
• Will not support fungus growth.
• Easy maintenance.

Applications:

• Aquaguard is designed for use as:
• Waterproof coating for sloped roofs and vertical walls.
• Waterproof coating over existing terrazzo tiles.
• Waterproof coating over corrugated iron sheets.
• Waterproof and protective coating over roof polyurethane foam.
• Waterproofing and protection over bituminous waterproofing membranes and coatings.

Packaging:

• Aquaguard is available in 18 and 120 litre packs.
• Aquaguard Primer is available in 5 and 25 litre packs.

Coverage:

• 0.50 kg/m² to achieve 200 microns dry film thickness.

Shelf Life:

• Aquaguard  has a shelf life of 12 months from date of manufacture if stored at temperatures between 5???C and 40???C.

Product Details:

Master Builders Solutions MasterSeal NP 472 Waterproofing Sealant:

• MasterSeal NP 472 is a high performance one component, moisture curing, polyurethane construction sealant. In properly designed and constructed joints the product has been formulated to offer a non-slump elastomeric seal, which exhibits good skin formation time and a fast cure.

Typical Applications:

• MasterSeal NP 472 has been developed specifically for sealing dynamically moving joints such as; expansion and control joints. MasterSeal NP 472 demonstrates high elasticity and recovery properties and therefore may be used to bond and seal most common building materials including concrete, glass, wood, stone, metal and anodised aluminium. In addition MasterSeal NP 472 has excellent tear resistance and good weathering characteristics.

Advantages:

• Durable resilient seal
• Non-staining
• Primer-free (except M1 smooth mortar)
• Demonstrates good resistance to dilute acids and alkalis
• Different colours available

Packaging And Colors:

• MasterSeal NP 472 is supplied in 310ml cartridge and 600ml sausage.
• MasterSeal NP 472 is available in: Concrete Grey (RAL 7004), Off White (RAL 1015) and White (RAL 9010)
• Note: The colours mentioned are closest match to the RAL Nos.

Standards:

• Conforms to ISO 11600 Class F25LM on anodized aluminum and mortar. Conforms to ASTM C920 Type S, Grade NS, Class 25, Use T1, NT, A and M Conforms to DIN 18540

Product Details:

We, "Classic Trading Corporation" are Wholesaler and Trader of Waterproofing Chemical, Grouting Compound, Bonding Agent, Mortar Admixture, Grouting Machine, PPF Fiber and many more since 2015.

Product Details:

We, "Classic Trading Corporation" are Wholesaler and Trader of Waterproofing Chemical, Grouting Compound, Bonding Agent, Mortar Admixture, Grouting Machine, PPF Fiber, Birla opus paints and many more since 2015.